Non-metal and Non-metal and Inherent Flame Retardant Hi-Vis industry jacket with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Concealed front zip and press studs. Extended back. Two loops for communication equipment. Right chest pockets with flap, mobile phone pocket and strap for pencils. Left chest pocket with flap. Vertical chest pocket with zip. Sleeve pocket with flap, hidden keyring holder and strap for ID-pocket. Side pockets with flaps. Adjustable waist and cuffs. Special order - please allow an additional 5 days approximately. *The jacket has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2.
Quality
- Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, LOI: 29,8%
- Lining, Tera TX Light, 160 g/m², LOI: 26,7%
Certifications
- The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
-
EN ISO 11612
A1+A2 B1 C1 F1
EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
-
IEC 61482-2
APC 2
IEC 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
-
EN 1149-5
EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
-
EN 13034
type PB[6]
EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
-
EN ISO 20471
CL.2*
EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
-
EN ISO 15797
50 WASHES
EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.