Non-metal and Inherent Flame Retardant softshell jacket that reaches PPE category 4 (higher than 40 cal/cm²).
The jacket is ergonomically shaped for working with raised arms and is made from a soft, wind and water resistant softshell fabric. Concealed front zip and double storm flap with press studs. Two loops for communication equipment. Chest pockets with zip. Side pockets with zip. Inside knitted cuffs in sleeves. Drawcord at the bottom of the jacket. Heat sealed reflective stripes for greater comfort. *The jacket has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2.
Quality
- Windtech FR 550, 550 g/m², wind and water resistant
Certifications
- The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
-
EN ISO 11612
A1 B2 C2 F2
EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
-
IEC 61482-2
APC 2
IEC 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
-
EN 1149-5
EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
-
EN 13034
type PB[6]
EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
-
EN ISO 20471
CL.2* (XS-S) CL.3 (M-4XL)
EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.