Non-metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets with a wide fit and a windproof jersey lining.
Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Right cargo pocket with flap, ruler pocket, separate mobile phone pocket, pencil holder and concealed knife button with loop. Left cargo pocket with flap and concealed keyring holder, ruler pocket, first aid pocket and concealed knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby. Back hem in HTFR Dobby. Adjustable foot width with press studs. Contrast stitching. These trousers have a sewn in lining, size will fit smaller. Special order – please allow an additional 5 days approximately. *The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5930 and 5990.
Quality
- Reinforcing fabric, HTFR Dobby, 295 g/m²
- Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8%
- Lining, PU-coated jersey, Cantex Jersey IR, 210 g/m²
Certifications
- The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
-
EN ISO 11612
A1+A2 B1 C1 F1 EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame. -
IEC 61482-2
APC 2
IEC 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
- EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
- EN ISO 20471 EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
-
*EN 342
(5852+5800 or 5809)
EN 342 - The standard specifies clothing that protects against cold.